GT-91087 PCB Mounted/DIP POE PD Module DC/DC

GT-91087
GT-91087, POE PD Module DC/DC, PCB Mounted/DIP, Power Over Ethernet Powered Device Converter (IEEE802.3af PoE PD) Power Supply AC Adaptor, , Input Rating: 36-60 VDC, Pin 1: N/C, Pin 2,3:-V, Pin 4,5: +V, Output Rating: 15.4 Watts, Power rating with convection cooling (W) , 5-24V in 0.1V increments, Approvals: RoHS; China RoHS;GT-91087, POE PD Module DC/DC, PCB Mounted/DIP, Power Over Ethernet Powered Device Converter (IEEE802.3af PoE PD) Power Supply AC Adaptor, , Input Rating: 36-60 VDC, Pin 1: N/C, Pin 2,3:-V, Pin 4,5: +V, Output Rating: 15.4 Watts, Power rating with convection cooling (W) , 5-24V in 0.1V increments, Approvals: RoHS; China RoHS;
Information
Model NumberGT-91087
CE EC-Declaration for MedicalContact GlobTek for more information
CE EC-Declaration for Industrial/Commercial/ITEContact GlobTek for more information
CE EC-Declaration for HouseholdContact GlobTek for more information
UKCA-Declaration for MedicalContact GlobTek for more information
UKCA-Declaration for Industrial/Commercial/ITEContact GlobTek for more information
UKCA-Declaration for HouseholdContact GlobTek for more information
Morocco SDoC Declarationhttps://cs.globtek.info/Morocco_SDoC_Declaration?id=a0O30000007P7YrEAK
RoHS/RoHS3 Declarationhttps://www.globtek.com/pdf/rohs_cert/a0O30000007P7YrEAK
Prop 65 Statementhttps://www.globtek.com/r2/PH7CNf
REACH Declarationhttps://www.globtek.com/r2/eM2co8
Conflict Minerals Declarationhttps://www.globtek.com/r2/vZY8R5
Model Parameters
TypePCB Mounted/DIP
TechnologyPower Over Ethernet Powered Device Converter (IEEE802.3af PoE PD) Power Supply AC Adaptor
CategoryPOE PD Module DC/DC
Input Voltage Range (V)36-60 VDC
Max Input Current (A)0.5A
Max Output Power Rating (W)15.4
Output Voltage Range (V)5-24
Efficiency
Ingress Protection
Size (mm)65*18*14
Enclosure
                User-added image




 
Rating Table
Model Number (Final ordering #/Part No to be defined)Output NumberVoltageAmps (Convection)Amps (Forced Air)Watts (Convection)Watts (Forced Air)RFQ
* (Final ordering #/Part No to be defined)
Specifications
A) ELECTRICAL SPECIFICATIONS:

01. DC Input Voltage: 36 – 60V
02. Output Regulation: +/- 5% measured at the output connector
03. Line Voltage Regulation: +/- 0.2% typical measured at the output connector
04. Output Ripple (Vp-p): 1% or 100mV max, measured at 20 MHz bandwidth with 0.1 uf ceramic capacitor in parallel with a low impedance 47 uf electrolytic capacitor connected at the output
05. Switching Frequency: 100 KHz typical
06. Efficiency : 80% typ

B) PROTECTION
01. Under Voltage Lockout:  30Vdc
02. Short Circuit: Protected unit will auto recover upon removal of fault
03. Current Limiting: 110% to 175% of output rating
04. Thermal: Internally protected against over-temperature conditions

C) SAFETY & EMC
01. Isolation Voltage : 1000Vdc
02. Isolation Resistance :100M ohms (min)
03. Designed to UL/EN/IEC 60950-1
04. Meet FCC Class B standard
05. Meet EN55022 Class B standard

D) OTHER:
01. MTBF: 200,000 Hours @ 25°C ambient temperature
02. Operating Temperature: -15°C to 65°C ambient temperature
03. Humidity: 0% to 90% relative humidity
04. Storage Temperature: -40°C to 85°C
05. Cooling: Free air cooling
06. Interoperability:  Complies with IEEE 802.3 AF,  tested by UNH-ioL
07. Input Set Classification Resistance : 24.9K ohms

E) ENCLOSURE
01. SIZE : 68*14*19 (L*W*H)m/m
02. Markings: Label and/or Pad Printed and/or Molded in the case

F) OPTIONS
01. Tighter output voltage regulation, +/- 2% or +/-3%
02. Reduced Vp-p Output Ripple
03. Custom Output Voltage, in 0.1V increment
Derating CurveUser-added image
Qty (ea.)/Carton720
Individual Box/Gift Box Size (mm)egg crate
Individual Box/Gift Box ColorWhite
Master Carton Size (mm)465 x 415 x 225
Gross Weight (kg)
Label Width (mm)12
Label Height (mm)12
Input Configuration
DescriptionPin 1: N/C, Pin 2,3:-V, Pin 4,5: +V
Approvals

Below follows a link to the latest regulatory certifications and marks for this specific product. National standards as well as certification schemes are constantly changing and so is the set of certification marks and symbols applicable to this product. Various standards, marks and symbols, and certificates are subject to change at any time without notice.

Additional standards or unique country certifications are available upon request. Please contact Globtek to request a quotation.

LogoDescription
RoHSSpecifications of directive 2011/65/EU Annex VI (ROHS-2) with amendment 2015/863-EU (ROHS-3) http://www.ce-mark.com/Rohs%20final.pdf
User-added imageCHINA SJ/T 11364-2014, China RoHS Chart: http://www.globtek.com/pdf/F-GT-DJD-8.4.1-006%20China%20RoHS%20Declaration%205-20-22.pdf

Request Info