Preferred ratings shown below. Custom output voltages available in 0.1V increment from the minimum voltage listed to the maximum voltage listed; contact sales.
Model Number (Final ordering #/Part No to be defined)
Voltage (V)
Current (A)
Power (W)
RFQ
AP73453*
AP361438*
AP73476*
AP73474*
AP73475*
AP73473*
AP73472*
AP73470*
AP73469*
AP73468*
AP73466*
AP73467*
AP73461*
AP73462*
AP73463*
AP73464*
AP73465*
AP73457*
AP73458*
AP73459*
AP73460*
AP73456*
AP73454*
AP73455*
AP73451*
AP73452*
AP73450*
AP73449*
AP73448*
AP73447*
AP291870*
AP263465*
AP148866*
AP140765*
AP238046*
AP260523*
AP260382*
AP260357*
AP253022*
AP250417*
AP249837*
AP82301*
82831*
GTM96180-18VV-T2A-XXXX
CUSTOM
CUSTOM
CUSTOM
* (Final ordering #/Part No to be defined)
Specifications
Input
Input Voltage:
Specified: 90-264VAC, Nameplate: 100-240VAC 100% rated load current for 90-264VAC 85% rated load current for 85-264VAC 100% rated load current for 110-370VDC
-20°C to 40°C (full load) See derating table for output power capability at other temperatures. Extended low temperature range available as a custom option.
Storage Temperature:
-30°C to 80°C
Humidity:
0% to 95% relative humidity, non-condensing
Altitude:
5000m
Ingress protection:
IP42 standard, IP52 available as a special option
Cooling:
Convection
RoHS:
Complies with EU 2011/65/EU amended by EU 2015/863 and China SJ/T 11363-2006
Safety
Dielectric Withstand Voltage:
4000VAC or 5656VDC from input to output 3000VAC or 4242VDC from input to earth (Class I models)
Touch Current:
Class I models: < 20uA Class II models: <75uA
Earth Leakage Current:
Class I models: <300uA Class II models: N/A
Isolation Options:
Floating output or Class I earthed output (desktop models)
Earth Continuity Test:
< 0.1 ohm between AC inlet earth pin and PCB termination point
Class B, FCC Part 15, Class B (with resistive load)
Radiated Emissions:
Class B, FCC Part 15, Class B (with resistive load)
Harmonic Current Voltage Distortion:
EN61000-3-2, Class A
Voltage Fluctuations/Flicker:
EN61000-3-3
Electrostatic Discharge (ESD) Immunity:
EN61000-4-2, 8KV contact discharge, 20KV air discharge
Radiated RF Immunity:
EN61000-4-3, 10V/m 80-1000MHz, 3V/m 1-2.7GHz, 80% 1KHz AM
EFT/Burst Immunity:
EN61000-4-4, 4KV/100kHz.
Line Surge Immunity:
EN61000-4-5, 2KV differential, 4KV common-mode
Conducted RF Immunity:
EN61000-4-6, 3VRMS, 80% 1KHz AM
Power Frequency Magnetic Field Immunity:
EN61000-4-8, 30A/m
Voltage Dip Immunity:
EN61000-4-11
Enclosure
Housing:
High impact plastic, 94V0 polycarbonate, non-vented
AC Input Mechanical Options:
Wall plug-in, changeable blades (Class II only) Desktop housing, extended housing: C6, C8, C14, or C18 IEC inlet (Class I or Class II)
Markings:
Label or laser printed
Special Options
Removal of LED (optional)
Custom cord-sets (custom cord and/or connector types). Note: 5VDC USB power supplies with Micro-B or Type-C connectors have a voltage regulation specification of ±8% (4.6V to 5.4V).
Custom markings
Short term output surge capability
Reduced leakage current versions (10uA max) for Type-CF medical applications and/or for AC noise sensitive equipment. (15W or less, 5 to 24V output voltage range.)
Tightened output voltage tolerance
Reduced output voltage ripple
Improved reliability PCB laminate with plated-through-holes for IPC610 Class 2 compliance
Custom housing colors
Quasi constant-current output for SLA (lead-acid) battery charging applications
Derating Curve
Qty (ea.)/Carton
60
Individual Box/Gift Box Size (mm)
Egg Crate
Individual Box/Gift Box Color
Master Carton Size (mm)
430 x 370 x 320
Gross Weight (kg)
15.2
Label Width (mm)
36.5
Label Height (mm)
48.5
Input Configuration
Description
IEC 60320/C18 AC Inlet connector, Class II, Non-Earth Ground
Below are standard cordsets which are "not included" (unless stated above); these may be purchased separately or packaged with the power supply. Please contact your Sales Engineer if the style required is not shown below. Many more available in different lengths, colors or cable material.
