GTM43004P-WWVV-x.x-P3 Potted/Encapsulated in plastic housing Medical Power Supply
GTM43004P-WWVV-x.x-P3 | |||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
GTM43004P-WWVV-x.x-P3, Medical Power Supply, Potted/Encapsulated in plastic housing, Regulated Switchmode AC-DC Power Supply AC Adaptor, , Input Rating: 100-240V~, 50-60 Hz, , Output Rating: 120 Watts, Power rating with convection cooling (W) , 5-48V in 0.1V increments, Approvals: IP68; CE; Class I; GOST-R; Level V; PSE; RoHS; China RoHS; Ukraine; VCCI; WEEE; cRUus; Designed to meet 60950-1; cULus; Designed to meet 60335; Designed to meet EN 60950-1; Designed to meet EN 60601-1; | |||||||||||||||||||||||
Information | |||||||||||||||||||||||
Model Number | GTM43004P-WWVV-x.x-P3 | ||||||||||||||||||||||
Agency Documents | http://www.globtek.info/certs/GTM43004P/ | ||||||||||||||||||||||
CE EC-Declaration for Medical | Contact GlobTek for more information | ||||||||||||||||||||||
CE EC-Declaration for Industrial/Commercial/ITE | https://cs.globtek.info/ec_declaration?id=a0Oa000000HSp93EAD | ||||||||||||||||||||||
CE EC-Declaration for Household | Contact GlobTek for more information | ||||||||||||||||||||||
UKCA-Declaration for Medical | Contact GlobTek for more information | ||||||||||||||||||||||
UKCA-Declaration for Industrial/Commercial/ITE | https://cs.globtek.info/ukca_declaration?id=a0Oa000000HSp93EAD | ||||||||||||||||||||||
UKCA-Declaration for Household | Contact GlobTek for more information | ||||||||||||||||||||||
Morocco SDoC Declaration | https://cs.globtek.info/Morocco_SDoC_Declaration?id=a0Oa000000HSp93EAD | ||||||||||||||||||||||
RoHS/RoHS3 Declaration | https://www.globtek.com/pdf/rohs_cert/a0Oa000000HSp93EAD | ||||||||||||||||||||||
Prop 65 Statement | https://www.globtek.com/r2/PH7CNf | ||||||||||||||||||||||
REACH Declaration | https://www.globtek.com/r2/eM2co8 | ||||||||||||||||||||||
Conflict Minerals Declaration | https://www.globtek.com/r2/vZY8R5 | ||||||||||||||||||||||
Model Parameters | |||||||||||||||||||||||
Type | Potted/Encapsulated in plastic housing | ||||||||||||||||||||||
Technology | Regulated Switchmode AC-DC Power Supply AC Adaptor | ||||||||||||||||||||||
Category | Medical Power Supply | ||||||||||||||||||||||
Input Voltage Range (V) | 100-240V~, 50-60 Hz | ||||||||||||||||||||||
Max Input Current (A) | 2.0A | ||||||||||||||||||||||
Max Output Power Rating (W) | 120 | ||||||||||||||||||||||
Output Voltage Range (V) | 5-48 | ||||||||||||||||||||||
Efficiency | V | ||||||||||||||||||||||
Ingress Protection | IP68 | ||||||||||||||||||||||
Size (mm) | 178.0*76.0*39.5 | ||||||||||||||||||||||
Enclosure | |||||||||||||||||||||||
Rating Table | |||||||||||||||||||||||
* (Final ordering #/Part No to be defined) | |||||||||||||||||||||||
Specifications | |||||||||||||||||||||||
A) ELECTRICAL SPECIFICATIONS: 01. Input Voltage: Specified 90-264 Vac, Nameplate rated: 100-240Vac 02. Input Frequency: Specified 47-63 Hz, Nameplate rated 50-60Hz 03. Output Regulation: +/- 5% measured at the output connector 04. Line Voltage Regulation: +/- 1% typical measured at the output connector 05. Output Ripple (Vp-p): +/-1% or 200 mV whichever is greater, measured at 20 MHz bandwidth with 0.1 uf ceramic capacitor in parallel with 47 uf electrolytic capacitor connected at the end of the output connector at nominal line 06. Turn-ON/OFF Overshoot: 10% maximum, 1 mS typical recovery time for 25% step load 07. Turn-ON Delay: 3000 mS, maximum @ full load, nominal line 08. Hold-Up Time: 10 mS typical @ nominal input voltage and full load 09. Inrush Current: 40A typical 115VAC input and 60A typical at 230VAC input 10. Switching Frequency: 100 KHz typical B) PROTECTION 01. Over-Voltage: AC cycling required to reset output 02. Short Circuit: AC cycling required to reset output 03. Input Protection: Input line fusing C) SAFETY 1. Dielectric Withstand Voltage: 5656 Vdc from primary to secondary 2. Earth Leakage Current: Maximum allowed values: 5 mA NC(Normal condition); 10 mA SFC(single fault condition) 3. Touch Current: Maximum allowed values: 100uA NC(Normal condition) 500uA SFC(single fault condition) 4. Earth continuity test:<0.1 Ohm or < 0.2 Ohm when with a non-detachable Power Supply cord 5. Means of Protection: 2 x MOPP 6. Primary to Secondary Bridging Capacitor: (2) * Y1 type capacitors in series D) OTHER: 01. MTBF: 200,000 Hours @ 25°C ambient temperature 02. Operating Temperature: 0°C to 40°C ambient temperature 03. Humidity: 0% to 90% relative humidity 04. Storage Temperature: -10°C to 80°C 05. Cooling: Convection E) ENCLOSURE 01. Size: 178.0*76.0*39.5 mm +/-1.0 mm 02. Markings: Label | |||||||||||||||||||||||
Derating Curve | |||||||||||||||||||||||
Qty (ea.)/Carton | 20 | ||||||||||||||||||||||
Individual Box/Gift Box Size (mm) | Egg Crated | ||||||||||||||||||||||
Individual Box/Gift Box Color | None | ||||||||||||||||||||||
Master Carton Size (mm) | 461 x 460 x 182 | ||||||||||||||||||||||
Gross Weight (kg) | 15.6 | ||||||||||||||||||||||
Label Width (mm) | 60.0 | ||||||||||||||||||||||
Label Height (mm) | 60.0 | ||||||||||||||||||||||
Input Configuration | |||||||||||||||||||||||
Description | |||||||||||||||||||||||
Output Configuration | |||||||||||||||||||||||
Common output connector options: Click to add to your request.
Comprehensive list of GlobTek output cordset options Contact GlobTek for your specific requirements or custom solutions. | |||||||||||||||||||||||
Approvals | |||||||||||||||||||||||
Below follows a link to the latest regulatory certifications and marks for this specific product. National standards as well as certification schemes are constantly changing and so is the set of certification marks and symbols applicable to this product. Various standards, marks and symbols, and certificates are subject to change at any time without notice. Additional standards or unique country certifications are available upon request. Please contact Globtek to request a quotation. | |||||||||||||||||||||||
|