GT-81083-05xx-W2U Wall Plug-in ICT/ITE Power Supply
GT-81083-05xx-W2U | ||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
GT-81083-05xx-W2U, ICT/ITE Power Supply, Wall Plug-in, Regulated Switchmode AC-DC Power Supply AC Adaptor, , Input Rating: 100-240V~, 50-60 Hz, UK BS 1363, 2 Blade w/Dummy Ground Class II, Output Rating: 5 Watts, Power rating with convection cooling (W) , 3-13V in 0.1V increments, Approvals: CE; China RoHS; WEEE; RoHS; UKCA; Level IV 115V; GOST-R; Ukraine; cUL 60950; Double Insulation; CB 60950; IP41; LPS 60950; Designed to meet EN 60601-1; | ||||||||||||||||||||||||||||||||||||
Information | ||||||||||||||||||||||||||||||||||||
Model Number | GT-81083-05xx-W2U | |||||||||||||||||||||||||||||||||||
Agency Documents | http://www.globtek.info/certs/GT-81083/ | |||||||||||||||||||||||||||||||||||
CE EC-Declaration for Medical | Contact GlobTek for more information | |||||||||||||||||||||||||||||||||||
CE EC-Declaration for Industrial/Commercial/ITE | https://cs.globtek.info/ec_declaration?id=a0Oa000000HTa4vEAD | |||||||||||||||||||||||||||||||||||
CE EC-Declaration for Household | Contact GlobTek for more information | |||||||||||||||||||||||||||||||||||
UKCA-Declaration for Medical | Contact GlobTek for more information | |||||||||||||||||||||||||||||||||||
UKCA-Declaration for Industrial/Commercial/ITE | https://cs.globtek.info/ukca_declaration?id=a0Oa000000HTa4vEAD | |||||||||||||||||||||||||||||||||||
UKCA-Declaration for Household | Contact GlobTek for more information | |||||||||||||||||||||||||||||||||||
Morocco SDoC Declaration | https://cs.globtek.info/Morocco_SDoC_Declaration?id=a0Oa000000HTa4vEAD | |||||||||||||||||||||||||||||||||||
RoHS/RoHS3 Declaration | https://www.globtek.com/pdf/rohs_cert/a0Oa000000HTa4vEAD | |||||||||||||||||||||||||||||||||||
Prop 65 Statement | https://www.globtek.com/r2/PH7CNf | |||||||||||||||||||||||||||||||||||
REACH Declaration | https://www.globtek.com/r2/eM2co8 | |||||||||||||||||||||||||||||||||||
Conflict Minerals Declaration | https://www.globtek.com/r2/vZY8R5 | |||||||||||||||||||||||||||||||||||
Model Parameters | ||||||||||||||||||||||||||||||||||||
Type | Wall Plug-in | |||||||||||||||||||||||||||||||||||
Technology | Regulated Switchmode AC-DC Power Supply AC Adaptor | |||||||||||||||||||||||||||||||||||
Category | ICT/ITE Power Supply | |||||||||||||||||||||||||||||||||||
Input Voltage Range (V) | 100-240V~, 50-60 Hz | |||||||||||||||||||||||||||||||||||
Max Input Current (A) | 0.2A | |||||||||||||||||||||||||||||||||||
Max Output Power Rating (W) | 5 | |||||||||||||||||||||||||||||||||||
Output Voltage Range (V) | 3-13 | |||||||||||||||||||||||||||||||||||
Efficiency | IV | |||||||||||||||||||||||||||||||||||
Ingress Protection | IP41 | |||||||||||||||||||||||||||||||||||
Size (mm) | 66*41*49.05 | |||||||||||||||||||||||||||||||||||
Enclosure | ||||||||||||||||||||||||||||||||||||
Rating Table | ||||||||||||||||||||||||||||||||||||
* (Final ordering #/Part No to be defined) | ||||||||||||||||||||||||||||||||||||
Specifications | ||||||||||||||||||||||||||||||||||||
A) ELECTRICAL SPECIFICATIONS: 01. Input Voltage: 90-264 Vac 02. Input Frequency: 47 - 63 Hz 03. Output Regulation: +/- 5% measured at the output connector 04. Line Voltage Regulation: +/- 2% typical measures at full load 05. Output Ripple (Vp-p): 100 mV measured at 20 MHz bandwidth with 0.1 uf ceramic capacitor in parallel with 10 uf electrolytic capacitor connected at the end of output connector at nominal line 06. Turn-On/Turn-Off Overshoot: 5% maximum, 1mS typical recovery time for 25% step load 07. Turn-On Delay: <2 second typical 08. Hold-Up Time: 5mS typical @ nominal input voltage & full load 09. Inrush Current: 30A typical @ 115Vac input ; 60A typical @ 230Vac input 10. Switching Frequency: 65 KHz typical B) PROTECTION 1. Over-Voltage: Electronically Protected, unit will recover upon removal of fault 2. Short Circuit: Electronically Protected, unit will recover upon removal of fault 3. Input Protection: Input line fusing C) SAFETY 1. Dielectric Withstand Voltage: 4242Vdc from primary to secondary 2. Earth Leakage Current: <0.25 mA @ nominal input voltage D) OTHER: 1. MTBF: 200,000 hours @ 25°C ambient temperature 2. Operating Temperature: 0°C to 40°C ambient temperature 3. Humidity: 0% to 90% relative humidity 4. Storage Temperature: 20°C to 80°C E) ENCLOSURE 1. Upper Housing: High impact plastic, 94V0 polycarbonate, non-vented 2. Lower Housing: High impact plastic, 94V0 polycarbonate, non-vented 3. Size: 66*41*49.05 mm +/-1.0 | ||||||||||||||||||||||||||||||||||||
Derating Curve | ||||||||||||||||||||||||||||||||||||
Qty (ea.)/Carton | 120 | |||||||||||||||||||||||||||||||||||
Individual Box/Gift Box Size (mm) | 85*51*62 | |||||||||||||||||||||||||||||||||||
Individual Box/Gift Box Color | White | |||||||||||||||||||||||||||||||||||
Master Carton Size (mm) | 445 x 326 x 284 | |||||||||||||||||||||||||||||||||||
Gross Weight (kg) | 15.6 | |||||||||||||||||||||||||||||||||||
Label Width (mm) | 17.7 | |||||||||||||||||||||||||||||||||||
Label Height (mm) | 22.1 | |||||||||||||||||||||||||||||||||||
Input Configuration | ||||||||||||||||||||||||||||||||||||
Description | UK BS 1363, 2 Blade w/Dummy Ground Class II The line and neutral pins have a rectangular cross section 6.35 mm by 4.0 mm, 17.7 mm long and with centres 22.2 mm apart. The protective-earth pin is a rectangular cross section 8.0 mm by 4.0 mm, 22.3 mm long and with a centre line 22.2 mm from the line/neutral pin centre line. The dimensions were originally specified in decimal inches with asymmetric tolerances and redefined as minimum and maximum metric dimensions in BS 1363:1984. | |||||||||||||||||||||||||||||||||||
Output Configuration | ||||||||||||||||||||||||||||||||||||
Common output connector options: Click to add to your request.
Comprehensive list of GlobTek output cordset options Contact GlobTek for your specific requirements or custom solutions. | ||||||||||||||||||||||||||||||||||||
Approvals | ||||||||||||||||||||||||||||||||||||
Below follows a link to the latest regulatory certifications and marks for this specific product. National standards as well as certification schemes are constantly changing and so is the set of certification marks and symbols applicable to this product. Various standards, marks and symbols, and certificates are subject to change at any time without notice. Additional standards or unique country certifications are available upon request. Please contact Globtek to request a quotation. | ||||||||||||||||||||||||||||||||||||
|