GT-TDIN0-024024 DIN Rail ICT/ITE Power Supply

GT-TDIN0-024024
GT-TDIN0-024024, ICT/ITE Power Supply, DIN Rail, Regulated Switchmode AC-DC Power Supply AC Adaptor, , Input Rating: 90 ~ 264VAC, 127 ~ 370VDC (47 ~ 63Hz), Terminal Block, Output Rating: 24 Watts, Power rating with convection cooling (W) , 24V in 0.1V increments, Approvals:GT-TDIN0-024024, ICT/ITE Power Supply, DIN Rail, Regulated Switchmode AC-DC Power Supply AC Adaptor, , Input Rating: 90 ~ 264VAC, 127 ~ 370VDC (47 ~ 63Hz), Terminal Block, Output Rating: 24 Watts, Power rating with convection cooling (W) , 24V in 0.1V increments, Approvals:
Information
Model NumberGT-TDIN0-024024
Agency Documentshttp://en.globtek.com/safety-agency-documents-pending/
CE EC-Declaration for MedicalContact GlobTek for more information
CE EC-Declaration for Industrial/Commercial/ITEContact GlobTek for more information
CE EC-Declaration for HouseholdContact GlobTek for more information
UKCA-Declaration for MedicalContact GlobTek for more information
UKCA-Declaration for Industrial/Commercial/ITEContact GlobTek for more information
UKCA-Declaration for HouseholdContact GlobTek for more information
Morocco SDoC Declarationhttps://cs.globtek.info/Morocco_SDoC_Declaration?id=a0Oa000000MmgJTEAZ
RoHS/RoHS3 Declarationhttps://www.globtek.com/pdf/rohs_cert/a0Oa000000MmgJTEAZ
Prop 65 Statementhttps://www.globtek.com/r2/PH7CNf
REACH Declarationhttps://www.globtek.com/r2/eM2co8
Conflict Minerals Declarationhttps://www.globtek.com/r2/vZY8R5
Model Parameters
TypeDIN Rail
TechnologyRegulated Switchmode AC-DC Power Supply AC Adaptor
CategoryICT/ITE Power Supply
Input Voltage Range (V)90 ~ 264VAC, 127 ~ 370VDC (47 ~ 63Hz)
Max Input Current (A)0.4A
Max Output Power Rating (W)24
Output Voltage Range (V)24
EfficiencyUSA DOE Level VI / Eco-design Directive 2009/125/EC, (EU) 2019/1782
Ingress ProtectionIP20
Size (mm)102*35.0*45.0 +/-1.0
Enclosure             DIN RAIL: COMPLIANT WITH EN50022, 2 RAILS:
User-added image
 
Rating Table
Model Number (Final ordering #/Part No to be defined)Output NumberVoltageAmps (Convection)Amps (Forced Air)Watts (Convection)Watts (Forced Air)RFQ
* (Final ordering #/Part No to be defined)
Specifications
01. Input Voltage: 90-264VAc, 127-380VDc
02. Input current: 0.4A RMS Max.
03. Input Frequency: Specified 47-63 Hz
04. Output Voltage: 5-24 Vdc
05. Output current: 1-4A continuous
06, Output Power (rated): 24 Watts continuous
07. Output Load Regulation: +/- 1% measured at the output connector
08. Line Voltage Regulation: +/- 1% typical measured at O/P connector
09. Output Ripple :240 mV p-p, At 20 MHz, bandwidth with 0.1uF ceramic capacitor in parallel with 10 uF, electrolytic capacitor connected at the end of output connecat nominal line
10. Turn-ON/Turn-OFF overshoot: 5% maximum,1 mS typical recovery time for 25% step load
11. Turn-ON Delay: 1 Second Max
12. Hold-Up Time: 13 mS at rated power (24W)
13. Efficiency: 86% measured at the full load, 220Vac Input

B) PROTECTION
01. Over load protection Automatic power limited

C) SAFETY
01. Dielectric Withstand Voltage: 1500 Vdc from primary to secondary
02. earth leakage: <3.5mA @ 90Vac input voltage
03. Ingress protection: IP20

D) OTHER:
01. MTBF: 200,000 Hours @ 25°C ambient temperature, 77,500 Hours at 45°C
02. Operating Temperature: -15°C to +50°C ambient temperature
03. Humidity: 0% to 90% relative humidity Non Condensing
04. Storage Temperature: -20°C to 85°C
05. RoHS 2: Complies with EU 2011/65/EU China SJ/T 11363-2006
06. Vibration 2G, 10~500Hz, 3 axes

E) ENCLOSURE
01. Housing: PC94-0 94-V0, Plastic material or equivalent
02. Size: 102*35.0*45.0 +/-1.0 mm
03. Weight: 117 g maximum
04. Markings: Label and/or Pad Printed and/or Molded in the case
Derating CurveN/A
Qty (ea.)/Carton60
Individual Box/Gift Box Size (mm)100*53*65
Individual Box/Gift Box ColorWhite
Master Carton Size (mm)415 x 280 x 230
Gross Weight (kg)7.4
Label Width (mm)24.7
Label Height (mm)27.7
Input Configuration
DescriptionTerminal Block
Approvals

Below follows a link to the latest regulatory certifications and marks for this specific product. National standards as well as certification schemes are constantly changing and so is the set of certification marks and symbols applicable to this product. Various standards, marks and symbols, and certificates are subject to change at any time without notice.

Additional standards or unique country certifications are available upon request. Please contact Globtek to request a quotation.

LogoDescription

Request Info