GTM962253PWWWVV-P3 Potted ICT / ITE / Medical Power Supply
GTM962253PWWWVV-P3
GTM962253PWWWVV-P3, ICT / ITE / Medical Power Supply, 60601-1-4th Ed. , Potted, Regulated Switchmode AC-DC Power Supply AC Adaptor, , Input Rating: 100-240V~, 50-60 Hz, Contact GlobTek for customization requests on any type of cable in any customer specified lengths., Output Rating: 225 Watts, Power rating with convection cooling (W) , 12-54V in 0.1V increments, Approvals: IP68;
The black outlined drawing represents a housing which is being phased out due to end of usable life of the mold used to make it. The blue outlined drawing is the replacement housing. Both may be used interchangeably and mixed within any given lot.
± 2.0% (worst case, set point + load/line regulation)
Load Regulation:
± 0.5% (measured at connector)
Line Regulation:
± 0.2% (measured at connector)
Ripple:
1% pk-pk (using a 47µF low-ESR cap + 0.1µF ceramic capacitor, measured @ 20MHz BW)
Transient Response:
<5% deviation (with 25% load step), recovery to within 1% in 1ms
Startup Overshoot:
<5% (full load)
Hold-up Time:
10ms min. (full load)
Aux Output Voltage Regulation:
12V ± 2V (10V min. / 14V max.), for 0A ≤ IAux ≤0.8A
Aux regulation guaranteed when main output power ≥ 25% of 140W rating (~34W).
For main output power < 25%, aux output voltage may drop to < 50% of nominal rating, depending on aux output load. Please check with your system. For main output = 12V, aux output voltage is same as main output.
Custom aux output voltages (5V to 12V), available for main output voltages from 12-24V
Derating Curve
Qty (ea.)/Carton
20
Individual Box/Gift Box Size (mm)
Cellular Packag
Individual Box/Gift Box Color
Master Carton Size (mm)
450 x 461 x 182
Gross Weight (kg)
16
Label Width (mm)
TBD
Label Height (mm)
TBD
Input Configuration
Description
Contact GlobTek for customization requests on any type of cable in any customer specified lengths.
Approvals
Below follows a link to the latest regulatory certifications and marks for this specific product. National standards as well as certification schemes are constantly changing and so is the set of certification marks and symbols applicable to this product. Various standards, marks and symbols, and certificates are subject to change at any time without notice.
Additional standards or unique country certifications are available upon request. Please contact Globtek to request a quotation.
Logo
Description
Medical 4th Ed.
EN/IEC 60601-1-2, 4th Edition (Please visit EMC reports for further info)
IP68
Ingress Protection: ?IP68 to IEC60529:2001 Totally dust tight and Protected against long periods of immersion under pressure
IP68
Ingress Protection: ?IP68 to IEC60529:2001 Totally dust tight and Protected against long periods of immersion under pressure
IP68
Ingress Protection: ?IP68 to IEC60529:2001 Totally dust tight and Protected against long periods of immersion under pressure
IP68
Ingress Protection: ?IP68 to IEC60529:2001 Totally dust tight and Protected against long periods of immersion under pressure
IP68
Ingress Protection: ?IP68 to IEC60529:2001 Totally dust tight and Protected against long periods of immersion under pressure
IP68
Ingress Protection: ?IP68 to IEC60529:2001 Totally dust tight and Protected against long periods of immersion under pressure
IP68
Ingress Protection: ?IP68 to IEC60529:2001 Totally dust tight and Protected against long periods of immersion under pressure
IP68
Ingress Protection: ?IP68 to IEC60529:2001 Totally dust tight and Protected against long periods of immersion under pressure
