GTM965500P-WWWVV-XX Open Frame/Internal ICT / ITE / Medical Power Supply

Name: GTM965500P-WWWVV-XX
Creator: GlobTek

GTM965500P-WWWVV-XX

GTM965500P-WWWVV-XX, ICT / ITE / Medical Power Supply, 60601-1-4th Ed. , Open Frame/Internal, Regulated Switchmode AC-DC Power Supply AC Adaptor, Forced airflow for full rated power (CFM): 10, Input Rating: 100-240V~, 50-60 Hz, , Output Rating: 550 Watts, Power rating with convection cooling (W) 300, 12-54V in 0.1V increments, Approvals: Conforms to 62368-1; Morocco; UKCA;

Information

Model Number

GTM965500P-WWWVV-XX

CE EC-Declaration for Medical

https://cs.globtek.info/ec_declaration?id=a0O3a00000MNu7HEAT

CE EC-Declaration for Industrial/Commercial/ITE

https://cs.globtek.info/ec_declaration?id=a0O3a00000MNu7HEAT

CE EC-Declaration for Household

Contact GlobTek for more information

UKCA-Declaration for Medical

https://cs.globtek.info/ukca_declaration?id=a0O3a00000MNu7HEAT

UKCA-Declaration for Industrial/Commercial/ITE

https://cs.globtek.info/ukca_declaration?id=a0O3a00000MNu7HEAT

UKCA-Declaration for Household

Contact GlobTek for more information

Morocco SDoC Declaration

https://cs.globtek.info/Morocco_SDoC_Declaration?id=a0O3a00000MNu7HEAT

RoHS/RoHS3 Declaration

https://www.globtek.com/pdf/rohs_cert/a0O3a00000MNu7HEAT

Prop 65 Statement

https://www.globtek.com/r2/PH7CNf

REACH Declaration

https://www.globtek.com/r2/eM2co8

Conflict Minerals Declaration

https://www.globtek.com/r2/vZY8R5

Model Parameters

Type

Open Frame/Internal

Technology

Regulated Switchmode AC-DC Power Supply AC Adaptor

Features

High power density 3" x 5" format
Full power rating at 50°C ambient and 90VAC
Auxiliary +12V fan and +5V standby outputs
Power-good, remote-off, & remote-sense
Output voltage fine adjustment
20ms min. holdup time for full power range
Available with earthed output or floating output (with functional earth)
ITE/ICT and medical (2 x MOPP) certified

Input

Input Voltage:	90 - 264VAC (Nameplate: 100 - 240VAC)
Input Frequency:	47 - 63Hz (Nameplate: 50 - 60Hz)
Input Current:	6.5A max. @ 100VAC, 5.2A typ. @ 115VAC, 2.5A typ. @ 240VAC (full load)
No Load Input Power:	< 500mW, 240VAC
Inrush Current:	< 35A @ 115VAC , < 70A @ 240VAC (cold start @ 25°C)
Efficiency:	92 - 95% typ.
Power Factor:	> 0.95 @ 115Vac, > 0.90 @ 240VAC (full load)

Main Output

Total Output Power (Main + Standby + Fan Output):	550W (with forced air cooling) 300W (natural convection cooling)
Turn-on Delay:	< 2 seconds @ 115VAC
Output Voltage Regulation:	± 2.5% (set point tolerance + load/line regulation, measured at output connector)
Load Regulation:	± 1.0% (measured at output connector)
Line Regulation:	± 0.5% (measured at output connector)
Ripple:	< 1% pk-pk (using a 47µF low-ESR cap + 0.1µF ceramic capacitor, measured @ 20MHz BW)
Transient Response:	± 5% deviation max. (with 50% load step), recovery to within ±1% within 1ms
Startup Overshoot:	< 5%
Hold-up Time:	20ms min. (100VAC, full load)
Power-Good (PG):	Signal typically goes low ~10ms ahead of AC power failure or entering of protection state 5V logic level, V_H = 4.90V typ. @ I_PG= 100µA
Remote-Off (RO):	Pull 'Remote Off' to COM to disable main output; leave floating or connect to +5V_SB otherwise I_RO= 2mA typ. during disabled/off state
Remote-Sense:	Up to 500mV total cable-drop compensation, reverse and short circuit protected
Output Voltage Fine Adjustment:	Via potentiometer, ±5% adjustment range

Standby Output

Output Voltage:	5V
Output Current:	1A
Output Voltage Regulation:	± 5.0% (set point tolerance + load/line/cross regulation)
Ripple:	2% pk-pk (using a 47µF low-ESR cap + 0.1µF ceramic capacitor, measured @ 20MHz BW)
Hold-Up Time:	20ms min.
Always On?	Yes

Fan Output

Output Voltage:	12V
Output Current:	0.5A
Output Voltage Regulation:	± 15.0% (set point tolerance + load/line/cross regulation)
Ripple:	1% pk-pk (using a 47µF low-ESR cap + 0.1µF ceramic capacitor, measured @ 20MHz BW)
Always On?	Follows 'Remote-Off' signal (i.e. Fan is off when RO is pulled low.)

Protections

Input Protection:	MOV transient suppressor, dual high breaking capacity fuses
Over-Voltage Protection:	110-150%, latching, cycle AC power to reset
Over-Current Protection:	105-150%, non-latching with auto-recovery
Short Circuit Protection:	Non-latching with auto-recovery
Over-Temperature Protection:	Latching, cycle AC power to reset

Environmental

MTBF:	1,500,000 hours @ 25°C ambient, full load (Telcordia SR-332, Issue 3)
Operating Temperature:	-20°C to 50°C (full output power), -20°C to 70°C (with derating)
Storage Temperature:	-40°C to 85°C
Humidity:	0% to 95% relative humidity, non-condensing
Altitude:	5000m max.
Vibration:	Conforms to EN60068-2-6

Safety

Certifications:	IEC60601-1 IEC62368-1 IEC60335-1
Dielectric Withstand Voltage:	4000VAC (primary-to-secondary) 1500VAC (primary-to-earth) 1500VAC (secondary-to-earth) [Functional earth option only]
Output Touch Current:	NC: <100µA SFC: <500µA
Earth Leakage Current:	NC: <200µA SFC: <1.0mA
Means of Protection:	2 x MOPP (primary-to-secondary) 1 x MOPP (primary-to-earth) 1 x MOPP (secondary-to-earth) [Functional earth option only]

EMC

Certifications:	IEC60601-1-2 EN55032 (CISPR32) EN55035 (CISPR35)
Conducted Emissions:	Class B, FCC Part 15 (with resistive load)
Radiated Emissions:	Class B, FCC Part 15 (with resistive load)
Harmonic Current Voltage Distortion:	EN61000-3-2, Class A
Voltage Fluctuations/Flicker:	EN61000-3-3
Electrostatic Discharge (ESD) Immunity:	EN61000-4-2, 10KV contact discharge, 20KV air discharge (applied to input, output, or control connector)
Radiated RF Immunity:	EN61000-4-3, 10V/m 80-2700MHz, 80% 1KHz AM.
EFT/Burst Immunity:	EN61000-4-4, 4KV/100kHz.
Line Surge Immunity:	EN61000-4-5, 2KV differential-mode, 4KV common-mode
Conducted RF Immunity:	EN61000-4-6, 3VRMS, 80% 1KHz AM
Power Frequency Magnetic Field Immunity:	EN61000-4-8, 30A/m
Voltage Dip Immunity:	EN61000-4-11

Mechanical

Dimensions (nom.) Open-Frame (GTM965500P):	127.0 x 76.2 x 33.4mm (5.00" x 3.00" x 1.31") [Height measurement is PCB thickness + tallest component]
Dimensions (nom.) Open-Frame with baseplate (GTM965500P-BP):	127.0 x 76.2 x 39.1mm (5.00" x 3.00" x 1.54")
Dimensions (nom.) Enclosed with top fan (GTM965500P-TF):	138.0 x 88.0 x 57.4mm (5.43" x 3.47" x 2.26")
Dimensions (nom.) Enclosed with end fan (GTM965500P-EF/-EFI):	161.0 x 88.0 x 43.0mm (6.34" x 3.47" x 1.69")
Fan Audible Noise: Enclosed with top fan (GTM965500P-TF):	28.5dBA typ.
Fan Audible Noise: Enclosed with end fan (GTM965500P-EF/-EFI):	27.5dBA typ.
Mounting to end-application enclosure:	Refer to the mechanical drawing for the maximum/recommended penetration depths of mounting screws used to secure the power supply to the end-application enclosure. Failure to adhere to the specified depths may pose a safety risk.

Input/Output Connectors

Input Connector for Open-Frame, -BP, and -TF (J1):	Connector on PCB: JST B3P5-VH Recommended mate: JST VHR-5N Pinout: 1: Neutral \| 2: Line \| 3: Earth
Input Connector for -EF:	Connector on enclosure: TE/AMP 350767-1 Recommended mate: TE/AMP 350766-1 Pinout: 1: Line \| 2: Neutral \| 3: Earth
Input Connector for -EFI:	Connector on enclosure: IEC60320 C14 inlet Recommended mate: IEC60320 C13 power cord
Main Output Connectors for -M4 Suffix (J2A, J2B):	Connector on PCB: M4 PCB terminal Recommended mate: M4 or #8 ring terminal (brass or copper) Recommended mounting torque: 1.2Nm Pinout: J2A: V+ \| J2B: V-
Main Output Connector for -CN Suffix [≤24A only] (J2):	Connector on PCB: Molex 0039288080 Recommended mate: Molex 0039012085 Pinout: 1, 2, 5, 6: V+ \| 3, 4, 7, 8: V-
Standby Output + Signal Connector (J3):	Connector on PCB: Amphenol 98414-G06-06LF Recommended mate: Amphenol 10073599-006LF Pinout: A01: Remote Off \| A02: SNS+ \| A03: SNS- \| B01: Power Good \| B02: COM \| B03: +5V_SB
Fan Output Connector (J4):	Connector on PCB: Molex 22-04-1021 Recommended mate: Molex 22-01-1022 Pinout: 1: +FAN \| 2: -FAN
Negative/common connection:	V- (J2) and COM (J3) are separated by 2.2Ω to prevent main output current from returning through J3. V- and COM may be connected together at the end-system PCB.
Earth connection:	Connect four M3 mounting holes to earth. (Mounting to a metal plate is recommended) Connect pin 3 of J1 to earth. Care must be taken to ensure adequate creepage/clearance to earth. Check relevant safety standards for specific requirements. Note: Heatsinks are live and not connected to earth. When the end-system enclosure is non-conductive, using the baseplate (-BP) or enclosed versions (-TF, -EF) is recommended as a convenient way to connect all four holes to earth.

Derating Curve

Qty (ea.)/Carton

Individual Box/Gift Box Size (mm)

Individual Box/Gift Box Color

Master Carton Size (mm)

TBD

Gross Weight (kg)

Label Width (mm)

TBD

Label Height (mm)

TBD

Input Configuration

Description

null

Approvals

Below follows a link to the latest regulatory certifications and marks for this specific product. National standards as well as certification schemes are constantly changing and so is the set of certification marks and symbols applicable to this product. Various standards, marks and symbols, and certificates are subject to change at any time without notice.

Additional standards or unique country certifications are available upon request. Please contact Globtek to request a quotation.

Logo	Description
Medical 4th Ed.	EN/IEC 60601-1-2, 4th Edition (Please visit EMC reports for further info)
Conforms to UL STD. 62368-1 Certified to CSA STD C22.2 NO.62368-1	Conforms to UL STD. 62368-1 Certified to CSA STD C22.2 NO.62368-1
	Morocco SDoC declaration http://www.globtek.info/certs/Morocco%20SDoC%20Declaration/
	UKCA Certification
Conforms to UL STD. 62368-1 Certified to CSA STD C22.2 NO.62368-1	Conforms to UL STD. 62368-1 Certified to CSA STD C22.2 NO.62368-1
	Morocco SDoC declaration http://www.globtek.info/certs/Morocco%20SDoC%20Declaration/
	UKCA Certification