GTM96060-AWWVV-FW Open Frame/Internal Medical/ICT/ITE/Household use Power Supply
GTM96060-AWWVV-FW
GTM96060-AWWVV-FW, Medical/ICT/ITE/Household use Power Supply, Open Frame/Internal, Regulated Switchmode AC-DC Power Supply AC Adaptor, , Input Rating: 100-240V~, 50-60 Hz, PANEL MOUNT IEC 320/C8, cable UL1007, 18AWG, Length 60±10 mm, White & Black, S&T 9±1 mm, Output Rating: 6 Watts, Power rating with convection cooling (W) , 5-48V in 0.1V increments, Approvals:
Model Number (Final ordering #/Part No to be defined)
Voltage (V)
Current (A)
Power (W)
RFQ
GTM96060-A0606-1.0-FW*
5
1.2
6
GTM96060-A0606-1.0-FW*
5
1.2
6
GTM96060-A0606-1.0-FW*
5
1.2
6
GTM96060-A0606-1.0-FW*
5
1.2
6
GTM96060-A0606-1.0-FW*
5
1.2
6
GTM96060-A0606-1.0-FW*
5
1.2
6
GTM96060-A0606-1.0-FW*
5
1.2
6
GTM96060-A0606-1.0-FW*
5
1.2
6
GTM96060-A0606-1.0-FW*
5
1.2
6
GTM96060-A0606-1.0-FW*
5
1.2
6
GTM96060-A0606-1.0-FW*
5
1.2
6
GTM96060-A0606-1.0-FW*
5
1.2
6
* (Final ordering #/Part No to be defined)
Specifications
Input
Input Voltage:
Specified: 90-264VAC, Nameplate: 100-240VAC 100% rated load current for 90-264VAC 85% rated load current for 85-264VAC 100% rated load current for 110-370VDC
Input Frequency:
Specified: 47-63Hz, Nameplate: 50-60Hz
No Load Input Power:
<75mW @ 230VAC
Inrush Current:
<30A @ 230VAC (cold start @ 25°C)
Efficiency:
DoE Energy Level VI and CoC Tier 2, for models 5V and above
Output
Turn-on Delay:
1 second max. @ 100VAC and full load
Output Regulation
± 5% (measured at the output connector)
Line Regulation:
± 1% (measured at the output connector @ full load)
Ripple:
0.5% pk-pk or 50mV, whichever is greater (using a 47µF low-ESR cap + 0.1µF ceramic capacitor, measured @ 20MHz BW) (Note: < 0.2% or 25mV option available upon request)
Transient Response:
5% deviation max. (with 25% load step), recovery to within 1ms typ.
Startup Overshoot:
<5% (full load)
Hold-up Time:
8ms min. (100VAC and full load)
Power Indicator:
Green LED
Switching Frequency:
65KHz typ.
Protections
Input Protection:
300Vac MOV transient suppressor, input line fusing
Over-Voltage Protection:
110-130%, of nominal output voltage
Current Limiting: (Standard CV Models):
Short circuit and overload protected, auto recovery Output current limit: 120% to 250% of rated output current (Upper end of current limit range is determined by normal output power rating, not derated output power level)
Current Limiting: (Constant Current Models):
± 10% of specified nominal output current rating Current regulated from Vout (nom.) to 0.25 * Vout (nom.) Average output current below 0.25 * Vout will be reduced, and unit will hiccup cycle
Over-Temperature Protection
On-chip temperature sensor (integrated in primary-side switching controller), shut down at Tj = ~140°C, restart at Tj = ~70°C